Digital Design and Manufacturing

Additive Manufacturing (AM) is a new and growing technology and enables the production of highly complex parts with respect to its load cases. This course gives an introduction to this technology and the digital tools that will enable you to think AM!

Duration
1 day, 9AM to 5PM

Who Should Attend

Current industry professionals such as consultants, production employees, mechanical engineers, process engineers, managers.
Newcomers or mid-career switchers who want to acquire the skills and knowledge to enter the field of additive manufacturing.

Prerequisites

Technical background/understanding of manufacturing is recommended
Basic computer skills

Programme Outline

Learning Objectives

Basic understanding of Additive Manufacturing
Knowledge about steps in the AM process chain
Understanding of building process
Basic knowledge of the digital tools available to augment Additive Manufacturing

Programme Structure

Introduction to AM & Digital Design
Basics of Design for AM
Design & Topology Optimisation for AM
AM Software – Generative Design & Topology Optimisation
Modelling & Simulation – An AM Solution for Part Distortions and Residual Stresses
Geometry Preparation (CAD->STL)
Orientation
Support Definition
Process Simulation
Post-processing (deformation evaluation, compensation)

Assessment

Participants to take part in in-class quiz and sketching of simulation results to evaluate the course understanding and augment learning outcomes.

Course Fees and Funding

Full course fee inclusive of prevailing GST	You pay S$981.00
SkillsFuture Course Fee subsidy (up to 70%) For Singapore Citizens < 40 years old For Permanent Residents	You pay as low as S$294.30
Mid-Career Enhanced Subsidy (up to 90%) For Singapore Citizens ≥ 40 years old	You pay as low as S$114.30
Enhanced Training Support for SMEs (up to 90%) For SME - Sponsored employees	You pay as low as S$114.30

The above module fee payable is inclusive of GST of 9%.
This course is not eligible for the $4,000 credit of under SkillsFuture Credit (Mid-Career) top-up scheme.

Instructor

Low Hong Yee
Head of Pillar (EPD), Professor (EPD)
Singapore University of Technology and Design

Hong Yee Low received her PhD from Case Western Reserve University in 1998, in the area of polymer science and engineering. She spent about 2 years in Motorola Semiconductor Sector in Malaysia. To pursue her interest in materials research, she joined the Institute of Materials Research and Engineering (IMRE) in 2000.

During her career in IMRE, she has held a few key appointments including the department head for the Patterning and Fabrication Capability group for 5 years, principle investigator /program director for nanoimprinting research since 2003, as well as the director of research for 2 years. In terms of research, she has been working on nanoimprinting of biomimetic surfaces. Her team has developed a variety of biomimetic surface functionalities onto engineering polymers, which she believes has a good potential to be a more sustainable technology to impart and improve product performance without relying on chemicals.

Read more.

Register your interest

Policies and Financing Options

SSG Funding Terms and Conditions

Use of Personal Details

In consideration of the subsidy provided by SkillsFuture Singapore Agency (“SSG”) through the SUTD Academy for the Course,

I consent to:

The collection, use and disclosure to relevant third parties of my personal data by the SUTD Academy including but not limited to personal particulars, attendance records, assessment/performance records, for the following purposes:

Reporting of national statistics and conducting of holistic continuing education training research and analysis;
Facilitate the conduct of the relevant surveys and audits in relation to the Course;
General administration of the Course including but not limited to processing of the subsidy provided by SSG;
Publicity and marketing of the Course or other Courses to be provided by SSG or SUTD Academy; and
SSG or its Appointed Auditors or Nominated Representatives to directly contact Course Participant to obtain information deemed necessary for the purposes of conducting effectiveness survey or audits in relation to the Course.

I agree to:

Attend and complete all lectures, class exercises, workshops and assessments;
Complete the Course feedback at the end of the Course;
Complete the post Course survey sent about 3 to 6 months after class attendance; and
Sign up for a personal email account.

SUTD Privacy Statement

For more information on SUTD's privacy statement, please visit https://sutd.edu.sg/Privacy-Statement.

SUTD Terms and Conditions

Methods of Payment

Learn more about the available payment modes.

Cancellation & Refund Policy

If a written notification is sent to sutd_academy@sutd.edu.sg within 24 hours after course registration deadline there will be no cancellation charges. A full refund will be made.
No refund is provided if written notification is more than 24 hours after course registration deadline. SUTD Academy reserves the rights to collect the full fee amount from the participant.

Replacement Policy

Companies may replace participants who have signed up for the course by giving a 3-working day notice before the course commencement date to sutd_academy@sutd.edu.sg. Terms and conditions apply.

Registration Policy

Course may be cancelled due to insufficient participants. SUTD Academy will not be responsible or liable in any way for any claims, damages, losses, expenses, costs or liabilities whatsoever (including, without limitation, any direct or indirect damages for loss of profits, business interruption or loss of information) resulting or arising directly or indirectly from any course cancellation.
Course enrolment is based on a first-come, first-served basis.
SUTD Academy reserves the right to change or cancel any course or instructor due to unforeseen circumstances.

Types of Funding

Funding under Mid-Career Enhanced Subsidy ("MCES")

MCES is an enhanced Subsidy to encourage mid-career individuals to upskill and reskill, thereby helping them to remain competitive and resilient in the job market. With this, all Singaporeans aged 40 and above will receive higher subsidies of up to 90% course fee subsidy for SSG-funded certifiable courses.
Individuals/employers are not required to submit an application for the MCES. Those pursuing SSG-funded programmes will be charged the appropriate subsidised fees by SUTD Academy if they are eligible MCES. Individuals/employers will only need to pay the nett fee (full course fee after SSG's grant).

For more info, please visit SkillsFuture website at https://www.skillsfuture.gov.sg/enhancedsubsidy

Funding under Enhanced Training Support for SMEs ("ETSS")

ETSS is an enhanced funding to enable SMEs to send their employees for training.
SMEs will enjoy subsidies of up to 90% of the course fees when they sponsor their employees for SSG-funded certifiable courses.
In addition to higher course fee funding, SMEs can also claim absentee payroll funding of 80% of basic hourly salary at a higher cap of $7.50 per hour. SMEs may apply for the absentee payroll via the SkillsConnect system.
To qualify, SMEs must meet all of the following criteria:
- Organisation must be registered or incorporated in Singapore
- Employment size of not more than 200 or with annual sales turnover of not more than $100 million
- Trainees must be hired in accordance with the Employment Act and fully sponsored by their employers for the course
- Trainees must be Singapore Citizens or Singapore Permanent Residents

For more info, please visit SSG website at https://www.ssg.gov.sg/programmes-and-initiatives/funding/enhanced-training-support-for-smes1.html

Funding under Union Training Assistance Programme ("UTAP")

UTAP is a training benefit for NTUC members to defray their cost of training. This benefit is to encourage more union members to go for skills upgrading.

NTUC members enjoy 50% unfunded course fee support for up to $250 each year when you sign up for courses supported under UTAP (Union Training Assistance Programme).

For more info, please visit https://e2i.com.sg/individuals/ntuc-education-and-training-fund/.

Funding under Post-Secondary Education Account ("PSEA")

The Post-Secondary Education Account (PSEA) is part of the Post-Secondary Education Scheme to help pay for the post-secondary education of Singaporeans.

This is part of the Government’s efforts to encourage every Singaporean to complete their post-secondary education. It also underscores the Government’s commitment to support families in investing in the future education of their children and to prepare them for the economy of the future. PSEA is not a bank account.

It is administered by the Ministry of Education (MOE) and is opened automatically for all eligible Singaporeans.

Account holders can use their PSEA funds to pay for their own or their siblings’ approved fees and charges for approved programs conducted by approved institutions.

However, you will have to check your eligibility and balance by contacting MOE first.

Contact MOE at (65) 6260 0777

E-mail to MOE at contact@moe.edu.sg

Click here for MOE website.

Name:
Email Address:
Mobile Number:
Please select the course categories that align with your interests:
Advanced Manufacturing Agile and Scrum AI and Data Science Architecture Cybersecurity Data Protection Design Innovation Digital Media Finance Human Resource Overseas Business Journeys Logistics and Supply Chain Project Management Sustainability Unmanned Aerial Systems
Please list the specific courses you're interested in, and feel free to share any questions or enquiries you have:

Where did you primarily hear about the programme from?:
Subscribe to our mailing list : Yes No By subscribing to this mailing list, I hereby consent to the collection and use of my personal information as collected on the form by Singapore University of Technology and Design (SUTD), including the disclosure to SUTD trusted third parties. The personal information collected will be used for the purposes of communicating relevant news about SUTD and invitations to future events. I may choose, at any point, to unsubscribe from any of the above correspondence by an email to dpo@sutd.edu.sg.